•
Default:
Close
Note
•
When “Open” is selected, the alarm signal will be output for about 20 seconds when the power of the
unit is turned on.
[Pulse width]
When “Pulse” is selected for “Alarm output”, select an alarm output terminal duration from the following.
•
Available range:
1-120s
•
Default:
1s
13.6 Change the AUX name [Alarm]
Click the [Alarm] tab on the “Alarm” page. (
®
page 43, page 45)
The names of “AUX”, “Open” and “Close” on the “Live” page can be changed.
AUX title
[AUX (Up to 10 characters)]
Enter the name for “AUX” on the “Live” page.
•
Unavailable characters:
" &
•
Default:
AUX
[Open (Up to 5 characters)]
Enter the name for “Open” of “AUX” on the “Live” page.
•
Unavailable characters:
" &
•
Default:
Open
[Close (Up to 5 characters)]
Enter the name for “Close” of “AUX” on the “Live” page.
•
Unavailable characters:
" &
•
Default:
Close
Note
•
AUX is a camera terminal that allows users to operate (Open/Close) arbitrarily from the “Live” page.
For example, an operator can remotely control lights in a place where the camera is installed by
connecting the terminal to the light controller.
13.7 Configure the VMD settings [VMD area]
Click the [VMD area] tab on the “Alarm” page. (
®
page 43, page 45)
The video motion detection areas can be set on this page.
Operating Instructions
137
13 Configure the alarm settings [Alarm]
