![background image](http://html.mh-extra.com/html/panasonic/wv-sp500-series/wv-sp500-series_operating-instructions-manual_278016097.webp)
11.8 Adjust the angular field of view using the extra
zoom function
Click the [Setup>>] button of “Extra zoom” on the [Image quality] tab of the “Image/Audio” page. (
®
page 84)
It is possible to adjust the angular field of view using the extra zoom function.
•
: Click this button to adjust the zoom ratio to the “Wide” side.
•
: Click this button to set the zoom ratio to x1.0.
•
: Click this button to adjust the zoom ratio to the “Tele” side.
•
: Click this button to adjust the horizontal and vertical positions of the image after zooming.
IMPORTANT
•
The extra zoom function may not be activated on the appropriate position if the setting for the function
is performed after the settings for the mask areas (
®
page 91), privacy zone (
®
page 98), VMD area
(
®
page 114), VIQS area (
®
page 99). To prevent this, perform the setting for the extra zoom function
before other settings.
•
When using the lens distortion compensation function, if the extra zoom function is used, the lens
distortion compensation function is disabled.
Operating Instructions
97
11 Configure the settings relating to images and audio [Image/Audio]