Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” will
be displayed.
[Image capture size]
Select the capture size of images to be transmitted to the FTP server, images to be attached to the alarm mail,
or images to be saved to the SD memory card.
When “2 mega pixel [16:9]” is selected for “Image capture mode”
1920x1080/640x360/320x180
When “1.3 mega pixel [16:9]” is selected for “Image capture mode”
1280x720/640x360/320x180
When “1.3 mega pixel [4:3]” is selected for “Image capture mode”
1280x960/VGA/QVGA
When “3 mega pixel [4:3]” is selected for “Image capture mode”
2048x1536 fix
•
Default:
640x360
Note
•
When “2 mega pixel [16:9]” is selected for “Image capture mode”, “1920x1080” can only be used when
it is saved to the SD memory card.
•
When “3 mega pixel [4:3]” is selected for “Image capture mode”, “2048x1536” can only be used when
it is saved to the SD memory card.
[Image compression rate upon alarm detection]
Select “On” or “Off” to determine whether or not to change the image quality of “Quality1” (
®
page 74) upon
alarm detection.
•
On:
Images will be transmitted with the image quality selected for “Image quality upon alarm detection”.
•
Off:
Does not change the image quality upon alarm detection.
•
Default:
Off
[Image quality upon alarm detection]
Image quality can be changed upon an alarm occurrence. Select the image quality from the following.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
•
Default:
5 Normal
13.3 Configure the settings relating to H.264
recording [Alarm] (WV-SW559/WV-SP509)
Click the [Alarm] tab on the “Alarm” page. (
®
page 40, page 42)
The settings relating to the recording H.264 data on the SD memory card when an alarm is detected can be
configured on this page. To operate recording, it is necessary to configure the settings relating to SD memory
card and the video data. (
®
page 50)
Operating Instructions
111
13 Configure the alarm settings [Alarm]