![background image](http://html.mh-extra.com/html/panasonic/wv-sp500-series/wv-sp500-series_operating-instructions-manual_278016176.webp)
IMPORTANT
•
After completing the upgrade, delete temporary internet files. (
®
page 183)
•
Upgrade the firmware using a PC in the same subnet as the unit.
•
Follow the instructions from the dealer when upgrading the firmware.
•
When upgrading the application software, use the designated file (extension: img) for the firmware
upgrade.
The name of the firmware to be used for the upgrade should be “model name (Use small letters.
“WV-” is not required.)_xxxxx.img”.
* (“xxxxx” indicates the version of the firmware.)
•
Do not turn off the power of the camera during the upgrade process.
•
Do not perform any operation during upgrading and wait until it completes.
•
The following network settings will not be reset when upgrading the firmware after selecting “Reset the
settings to the default after completing the upgrade. (Except the network settings)”.
On/Off for DHCP, IP address, subnet mask, default gateway, HTTP port, HTTPS port, connection
protocol (HTTP/HTTPS), CRT key, server certificate, UPnP setting, line speed, bandwidth control (bit
rate), time & date
•
The viewer software used on each PC should be licensed individually. Refer to your dealer for the
software licensing.
19.3 Check the status [Status]
Click the [Status] tab of the “Maintenance” page. (
®
page 40, page 42)
The status of this camera can be checked on this page.
[Viewnetcam.com]
•
Server:
The URL of the “Viewnetcam.com” service server will be displayed.
•
Status:
The registration status for the “Viewnetcam.com” will be displayed.
•
Personal(Camera) URL:
The URL of the camera registered for “Viewnetcam.com” will be displayed.
176
Operating Instructions
19 Maintenance of the camera [Maintenance]