![background image](http://html.mh-extra.com/html/panasonic/wv-sp500-series/wv-sp500-series_operating-instructions-manual_278016081.webp)
Note
•
When audio is transmitted from the unit, the port number to be used will be the multicast port number
plus “1000”.
[Multicast TTL/HOPLimit]
*2
Enter a value for “Multicast TTL/HOPLimit”.
•
Available value:
1-254
•
Default:
16
IMPORTANT
•
When transmitting an H.264 image via a network, the transmitted image sometimes may not be
displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network
administrator.
•
When two or more network interface cards are installed on the PC in use, the network interface card(s)
not used for receiving images should be invalidated when displaying images using the multicast port.
[Smoother live video display on the browser (buffering)]
Perform settings to display camera images on the viewer software.
•
On:
Images are temporarily stored on the computer and are displayed smoother.
•
Off:
Images are displayed in real-time and are not stored on the computer.
•
Default:
On
*1
It is necessary to designate the unicast port number when “Unicast port (MANUAL)” is selected for “Transmission type”.
*2
It is necessary to designate the multicast IP address when “Multicast” is selected for “Transmission type”.
11.4 Configure the settings relating to the cropping
function [JPEG/H.264]
Click the [JPEG/H.264] tab on the “Image/Audio” page. (
®
page 40, page 42)
[Cropping]
Select whether or not to transfer “JPEG” or “H.264(2)” as cropping images.
Off:
cropping images are not transmitted.
H.264(2):
H.264(2) is transmitted as cropping images.
JPEG(VGA)/JPEG(640x360):
JPEG with a resolution of VGA or 640x360 is transmitted as cropping images.
JPEG(QVGA)/JPEG(320x180):
JPEG with a resolution of QVGA or 320x180 is transmitted as cropping
images.
•
Default:
Off
Note
•
The cropping function can be used when “2 mega pixel [16:9]”, “1.3 mega pixel [16:9]”, or “1.3 mega
pixel [4:3]” is selected for “Image capture mode”.
•
When changing the cropping position, use the cropping setup menu. (
®
page 82)
•
Changing the cropping settings temporarily stops transmission.
Operating Instructions
81
11 Configure the settings relating to images and audio [Image/Audio]