q
Auto Iris Lens Connector
This connector is used to connect the auto iris lens
with a 4-pin male connector supplied as a stan-
dard accessory (Part No. YFE4191J100).
w
Focus Fixing Screw
e
Flange-back Adjusting Ring
This ring is used to adjust the back focal length or
picture focus. Rotate this ring clockwise for a C-
mount lens or counterclockwise for a CS-mount
lens.
r
Lens (Option)
t
Camera Mounting Screw Hole
This hole is used to mount the camera onto a
mounting bracket.
y
Down Button (
K
)
This button is used to move the cursor downward.
It is also used to select items in the CAM SET UP
menu.
u
Left Button (
L
)
This button is used to move the cursor to the left.
It also selects the mode and can be used to adjust
some levels.
i
Up Button (
J
)
This button is used to move the cursor upward. It
is also used to select items in the CAM SET UP
menu.
o
Right Button (
M
)
This button is used to move the cursor to the right.
It also selects the mode and can be used to adjust
some levels.
!0
Set Button (
I
)
This button is used to activate an item selected in
the CAM SET UP menu.
!1
Gen-lock Termination Switch (Hi-Z, G/L 75
Ω
)
Set this switch to Hi-Z when a gen-lock video input
signal is looped through. In all other cases, set
this switch to 75
Ω
.
!2
RS485 Termination Switch
(Hi-Z – RS485 LINE TERM)
This switch is used to terminate the RS485 termi-
nal.
Normally keep it in
RS485 LINE TERM
position.
-7-
Hi-Z –
RS485
LINE TERM
