![background image](http://html.mh-extra.com/html/panasonic/wv-cpr460/wv-cpr460_operating-instructions-manual_277843008.webp)
!3
Half-Duplex/Full Duplex Selection Switches
(2-LINE-4-LINE)
These triple switches are used to select either
Half-duplex (left side) or Full-duplex (right side) for
the communication lines.
!4
Gen-lock Input Connector (GEN-LOCK)
This connector is used to connect an external sys-
tem for synchronization.
!5
Video Output Connector (VIDEO OUT)
This connector is used to connect the VIDEO IN
connector of the monitor.
!6
RS485 Terminals
(RS485, T(A)/T(B)/R(A)/R(B)/GND)
These terminals are used for RS485 site communi-
cation. Connect RS485 cables to these terminals.
!7
AC Inlet Socket
This socket is used to connect the power cord
(supplied as a standard accessory).
-8-
Cautions:
Connect to 12 V DC (10.8 V to 16 V) or 24 V AC
(19.5 V to 28 V) class 2 power supply only.
Make sure to connect the grounding lead to the
GND terminal when the power is supplied from a
24 V AC power source.
!8
AC/DC Compatible Input Terminal
(DC 12 V IN/AC 24 V IN)
This terminal is for connecting the 12 V DC or 24 V
AC power supply cord.