-30-
10. Press
L
or
M
to match the chroma phase of
the camera’s video signal, when observed at the
output of the special effects generator (SEG) or
Switcher, as closely as possible to the colour of
the original scene. (SC COARSE adjustment can
be incremented in steps of 90 degrees (4 steps)
by pressing
L
or
M
.)
Note:
After the fourth step, the adjustment returns
to the first step.
11. Move the cursor to SC FINE.
12. Press
L
or
M
to match the colour (hue) of the
camera’s video signal, when observed at the out-
put of the special effects generator (SEG) or
Switcher, as closely as possible to the colour of
the original scene.
The SC FINE adjustment has a range of 90
degrees of colour shift.
1 (1 - - 4): 0 degrees
2 (1 - - 4): 90 degrees
3 (1 - - 4): 180 degrees
4 (1 - - 4): 270 degrees
Notes:
• When the “I” cursor reaches the “+” end, it
jumps back to “–” . At the same time, SC
COARSE is incremented by one step to
enable a continuous adjustment. The reverse
takes place when the “I” cursor reaches the
“–” end.
• When
L
or
M
is kept pressed for a second
or more, the “I” cursor moves faster.
• For more accurate adjustment, supply both
the original camera video output signal and
the effect output video signal (program output
video signal) of the special effects generator
(SEG) to a vectorscope and compare the
chroma phase of both signals.
• To reset SC COARSE and SC FINE to the val-
ues preset at the factory, press
L
or
M
simultaneously. SC COARSE and SC FINE
adjustment are reset to the factory setting.
