![background image](http://html.mh-extra.com/html/panasonic/wv-bs500/wv-bs500_operating-instructions-manual_277734027.webp)
- 24 -
8. White Balance Setting (WHITE BAL)
(available only with WV-CS600A, WV-CS604E, WV-CSR600, or
WV-CST600)
(1) Auto-Tracing White Balance Mode (ATW)
• Display SET UP on the monitor screen.
(Refer to Setup Menu Display for details on displaying the SET UP
menu on the monitor screen.)
• Move the cursor to WHITE BAL and select ATW by using the joystick.
The white balance of the camera is automatically set.
• For fine adjustment of the ATW, press the CAM (SET) key to display
the ATW fine adjustment menu on the monitor screen.
You can mask the areas in this menu.
• Move the cursor to MASK SET and press the CAM (SET) key.
Forty-eight mask areas appear on the monitor screen.
Refer to the Light Control Setting section on page 20 for details about
masking areas.
• After masking areas, press the MON (ESC) key. The previous settings
ATW appear on the monitor screen.
• Move the cursor to “R.”
Use the joystick to obtain the optimum amount of red gain. The “I”
cursor moves to the left or right.
• Move the cursor to “B.”
Use the joystick to obtain the optimum amount of blue gain. The “I”
cursor moves to the left or right.
• Move the cursor to “RET” by using the joystick and press the CAM
(SET) key to return to SET UP.
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW *
WIDE D-RANGE OFF
MOTION DET OFF
AF MODE MANUAL *
RET SPECIAL *
Camera setting menu
** ATW **
R ....I....
−
+
B ....I....
−
+
MASK SET *
RET
ATW fine adjustment menu
Summary of Contents for WV-BS500
Page 3: ......