Panasonic WV-BS500, Operating Instructions Manual

Page: 21 / 42

- 18 -
5. To set endless turn ON/OFF
Move the cursor to ENDLESS, and move the joystick to the left or right
to set endless turn ON or OFF.
ON: The camera pans from the start position to the end position, then
keeps rotating in the same direction to return to the start position.
OFF: The camera pans from the start position to the end position,
then rotates backward to the start position.
This movement is repeated over and over.
6. To set a dwell time move the cursor to DWELL TIME and select a
dwell time by moving the joystick to the left or right. Dwell time
changes as follows:
■
LOCAL/REMOTE Setting
• Move the cursor to LOCAL/REMOTE, and move the joystick to the left
or right.
You can toggle between LOCAL and REMOTE.
Note:
REMOTE does not work when the WV-RM70 is connected.
Make sure LOCAL is selected in this case.
** AUTO PAN **
POSITION START
END
SPEED ...I....
L H
ENDLESS ON
DWELL TIME 2S
RET
** AUTO PAN **
POSITION START
END
SPEED ...I....
L H
ENDLESS ON
DWELL TIME 2S
RET
*** SET UP MENU ***
PRESET 1*
MAP*
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE OFF
LOCAL/REMOTE LOCAL
CAMERA *
Setup menu
■
Camera Setting
1. To display the Camera Setting Menu
• Move the cursor to CAMERA*, and press the CAM (SET) key. The
camera setting menu is displayed.
*** SET UP MENU ***
PRESET 1*
MAP*
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE OFF
LOCAL/REMOTE LOCAL
CAMERA *
Setup menu
** SET UP **
CAMERA ID OFF *
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW *
WIDE D-RANGE OFF
MOTION DET OFF
AF MODE MANUAL*
RET SPECIAL *
Camera setting menu
2S 3S 5S 10S
4MIN 2MIN
1S 30S
1MIN
Note: When the panning, tilting, lens zoom or focus operation is
controlled manually, the Auto mode function should be canceled.
To activate Auto mode, select AUTO MODE ON again.