Panasonic WV-BS500, Operating Instructions Manual

Page: 13 / 42

- 10 -
*** SET UP MENU ***
PRESET 1*
MAP*
HOME POSITION 15
SELF RETURN 10MIN
AUTO MODE OFF
LOCAL/REMOTE LOCAL
CAMERA *
Setup menu
(for camera setting)
3. Press the F1 button.
The SET UP MENU appears on the monitor.
4. To close the SET UP MENU, press the F4 button.
Note:
Do not change the SET UP MENU (for camera communication)
settings of the WV-CSR600 except CAMERA*. If those settings
are changed, the camera and the controller may get out of
control.
*** SET UP MENU ***
CAMERA*
UNIT NUMBER
BAUD RATE 19200
DATA BIT 8
PARITY BIT NONE
XON/XOFF NOT USE
WAIT TIME OFF
ALARM DATA AUTO 2
DELAY TIME OFF
COM. SET UP DISABLE
Setup menu
(for camera communication)
(only for WV-CSR600)
■
Menu Display
●
Setup Menu Display
1. Select the number of the camera you want to set up and a monitor to
display the SET UP MENU.
2. Display the D4 menu on the LCD by pressing the appropriate cursor
buttons.
D4 menu
F 1
F 1 F 2 F 3 F 4
Camera Set Up Menu
Res A.Res Exit
F 2 F 3 F 4
Camera Set Up Menu
On Exit
■
Communication Parameter Setting
●
Initial camera communication parameters
• Confirm the communication parameters of the matrix switcher (WJ-SX550A), and display the camera SET
UP MENU.
The initial camera communication parameters are shown in illustration above.
The other parameters are as follows:
Daisy : OFF
Camera In Number : 1
F/H Duplex : Full
●
Changing the camera communication parameters
1. Display the SET UP MENU. Move the cursor to COM. SET UP DISABLE and press the CAM (SET) key to
select COM. SET UP ENABLE.
2. Move the cursor to the item and select the parameter by moving the joystick to the left or right.
●
Submenu Display
The items marked * can be selected/changed on the submenu.
• Move the cursor to an item with the * mark and press the CAM (SET)
key. The submenu is displayed.
Note:
When you use the WV-CSR600, move the cursor to CAMERA on
the SET UP MENU and press the CAM (SET) key. The SET UP
MENU for camera setting appears in the display.