Panasonic Workio DP-C405, Service Handbook

Page: 432 / 808

432
DP-C405/C305/C265
FEB 2008 Ver. 1.1
F9 Unit
Maintenance 03 Print Device
Info.
00 F5/F6 Parameters Prints the memory contents of the F5
and F6 modes.
01 Machine Information Prints the machine setup information
list.
02 System Address
Info.
Prints the system memory setting.
03 Not Used
04 Print All Settings
( DP-C405 /C354
Series Only)
Prints All Settings. 2 Sided Print
available. (Starting with Firmware Ver.
V20043 : See
Note )
05 Calibration
Information.
Prints the calibration information.
06 SC Board Check List Prints the SC Board check list.
07 Printer Error Log
(DP-C405 Series
Only)
Prints the Printer Error Log list.
08 Not Used
04 RAM Edit
Mode
00 Relative Address
Setting
Setting of Relative address.
01 Not Used
05 Serial
Number
- - Indicate of Serial number.
06 RAM
Initialize
00 Parameter Initialize Resets the Fax and Function
parameters to default values.
Note: Turn the Power Switch to the
OFF , and back to the ON
position to enable the parameter
settings.
01 All Job Clear Clears all Jobs stored in Flash Memory.
02 Not Used
03 Shipment Set
Clears All Jobs, All Preset Data,
Parameter Initialize & Resets the
Counters (Fax).
04 LBP Fuser Reset Clears the LBP fuser error.
05 Dept. Counter Clear Clears the Department Counter.
06 Job Log Clear
Clears the Job Log.
07 Image Box Name Init Initialize the Image Box Name.
08 Maintenance Info.
Clear
(DP-C405 Series
Only)
Maintenance Information clear.
07 Firmware
Update
00 Update from Card Updates the firmware in the machine
with the Master Firmware Card.
01 Update from USB Updates the firmware in the machine
with the USB.
08
-
09
Not Used - - -
F9 Mode
Service
Mode
Item Remarks