Panasonic Workio DP-C405 Service Handbook Download Page 309

Page: 309 / 808

309

DP-C405/C305/C265

FEB 2008

Ver. 1.1

3.3.17.

Poor Printed Copy Quality

START

Is the Test Pattern printout
in Copier F1 Mode, or Fax
Service Mode 3 normal?

1. Replace the EC PCB.
2. Replace the LSU.
3. Replace the HVPS.
4. Replace the Developer Unit.

END

Perform a receiving test
with the reference fax unit.

Is the printed copy correct?

Yes

Make a local copy.

Yes

Check the connections of
CN 56/57 on the SC PCB, and
the Scanning Lamp.

Is the received copy correct?

1. Check CN352/353 on the FCB PCB.

2. Check the Telephone Line Cord.
3. Replace the FCB PCB.

Yes

Is a poor copy printed only
when receiving from a
specific transmitter?

Yes

Telephone line quality is poor.

The transmitting machine
may be defective.

Summary of Contents for Workio DP-C405








































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Workio DP-C405

Reviews:

Related manuals for Workio DP-C405

Brands by name

Popular brands

Panasonic Workio DP-C405, Service Handbook

Search results

Summary of Contents for Workio DP-C405

Reviews:

Related manuals for Workio DP-C405

Brands by name

Popular brands