Panasonic Workio DP-C405 Service Handbook Download Page 365

Page: 365 / 808

365

DP-C405/C305/C265

FEB 2008

Ver. 1.1

3.8.4.

Error Message Appears on the Unit

3.8.5.

System Error (CD Drive Related Error During Installation)

Error Message

• There may not be enough Sort Memory available in the

Panasonic Device to complete the print job.

Either install an optional Sort Memory, or change the

resolution to 300 dpi in the Printer Driver Properties dialog box.

• The print settings may not be matched for the system.

Change the printing settings in the Printer Driver Properties
dialog box.
Ex: Multi-sized printing.

Cannot complete print job;
Image memory overflow

Cannot print;
System error

Cannot complete print job;
Confirm print condition

• Change the resolution to 300 dpi in the Printer Driver properties

dialog box.

Problem

Possible Solution(s)

Cannot read the drive. • Insert the CD into the drive, and click “Retry”.

Summary of Contents for Workio DP-C405








































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Workio DP-C405

Reviews:

Related manuals for Workio DP-C405

Brands by name

Popular brands

Panasonic Workio DP-C405, Service Handbook

Search results

Summary of Contents for Workio DP-C405

Reviews:

Related manuals for Workio DP-C405

Brands by name

Popular brands