Panasonic WJND400 - NETWORK DISK RECORDER Operating Instructions Manual Download Page 15

Page: 15 / 233

About operating windows

(1) Displays the time and date for the download

start point/ending point. (page 42)

(2) [Go to date] button

Used to playback images from a specified time and date.
(page 22).

(3) [Go to last] button

Skips to the latest recorded image on the displayed camera
channel and starts playback.

(1) [REW] button

Plays recorded images in reversely at high speed.
Each time the button is clicked, the reverse speed changes
Step 2 (4x) > Step 3 (

x) > Step 4 (16x) > Step 5 (32x) >

Step6 (4

x) > Step 7 (96x).

(2) [PREV RECORD] button

Skips backward to play back recorded images.

(3) [REV PLAY] button

Plays recorded images in reverse.

(4) [PLAY] button

Plays recorded images.

(5) [NEXT RECORD] button

Skips forward to play back recorded images.

(6) [FF] button

Plays recorded images at high speed.
Each time the button is clicked, the speed changes Step 2
(4x) > Step 3 (

x) > Step 4 (16x) > Step 5 (32x) > Step6 (4

> Step 7 (96x).

(7) [PREV IMAGE] button

Clicking during playback or pause plays back one frame at a
time reversely, and then pauses.

(8) [PAUSE] button

Clicking during playback pauses playback.
Clicking during pause restarts playback.

(9) [STOP] button

Stops playback and displays live images from the camera.

(10) [NEXT IMAGE] button

Clicking during playback or pause plays back one frame at a
time forward and then pauses.

(11) [Download (TO PC)] box

Downloads the image being played to the PC.

(12) [Rec] box

Click [Up] button to display the [Recording] and [Recording
stop] buttons.
Click [Down] button to hide the [Recording] and [Recording
stop] buttons.

Playback point operation area

(1)

(2)

(3)

[Start]

: Set the time and date to start the

image to be downloaded.

[End]

: Set the time and date to end the image

to be downloaded.

[HDD] tab

(1)

(7)

(8)

(9)

(10)

(2)

(3)

(4)

(5)

(6)

(11)

(12)

[Download]

: Images and audio can be

downloaded.

[Viewer]

: Downloads viewer software for playing

back downloaded images.

[Recording] button

: Starts recording manually.

[Recording stop]
button

: Stops recording manually.

Important:

•

When displaying the [Recording] or [Recording stop] buttons,
click and hold [Up] button until displayed.

Summary of Contents for WJND400 - NETWORK DISK RECORDER










































































































































































































































Search results

Summary of Contents for WJND400 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND400 - NETWORK DISK RECORDER

Brands by name

Popular brands

Panasonic WJND400 - NETWORK DISK RECORDER, Operating Instructions Manual

Search results

Summary of Contents for WJND400 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND400 - NETWORK DISK RECORDER

Brands by name

Popular brands