Panasonic VoiceSonic VB-9411AD Operation, Installation And Programming Download

Page: 96 / 158

BEFORE PROGRAMMING

P-2

PROGRAMMING GUIDELINES / INITIALIZING THE SYSTEM BEFORE PROGRAMMING

CLR HOLD

1. PROGRAMMING GUIDELINES

Before programming the SBS:

●

Make certain all connections to Central Control Unit have been properly installed and tested.
See the Installation instructions manual.

●

Complete the programming table form with all necessary information obtained from the end
user.

●

Perform the initialization procedure before programming.

●

Enter features and installation specifications on a programming table form. See the Program-
ming Tables manual.

2. INITIALIZING THE SYSTEM BEFORE PROGRAMMING

WARNING

Please do not touch the Power Supply Unit.
You may be exposed to an electric shock or to dangerously high temperatures.

Before programming for the first time, reset the system as follows:

Turn off power for Central Control Unit.

Move the RAM switch to “CLR”.

Turn the power for the Central Control Unit back on.

Wait 5 seconds.

Move the RAM switch to “HOLD”.

NOTE : This is a one-time operation. If the procedure is repeated at the next programming session, all previously pro-

grammed data will be erased.

Summary of Contents for VoiceSonic VB-9411AD































































































































































Search results

Summary of Contents for VoiceSonic VB-9411AD

Reviews:

Related manuals for VoiceSonic VB-9411AD

Brands by name

Popular brands

Panasonic VoiceSonic VB-9411AD, Operation, Installation And Programming

Search results

Summary of Contents for VoiceSonic VB-9411AD

Reviews:

Related manuals for VoiceSonic VB-9411AD

Brands by name

Popular brands