manualshive.com logo in svg

Panasonic VoiceSonic VB-9411AD, Operation, Installation And Programming

Share
Download
Panasonic VoiceSonic VB-9411AD Operation, Installation And Programming Download Page 73

INSTALLATION OF CCU

I-13

CCU

PF TEL 1

1 2 3 4

A B

A

B

A

B

A B

DDK  connector

SLT (LD type)

SLT (DTMF type)

or

To telephone

Socket

6

1

Master

Socket (LJU)

1

2

3

6

5

4

2(B)

5(A)

To Exchange line Circuit

Exchange

line 1

PF TEL

1

PF TEL 1

■ 

CONNECTION OF SINGLE LINE TELEPHONE (SLT) FOR POWER FAILURE

Connect the Single Line Telephone for use in power failures to the PF1 port of the CCU.
During a power failure, the SLT connected to the PF1 port will be directly connected to Exchange
Line 1.

NOTE : A SLT connected to PF1 of the CCU is for power failures and cannot be used for other purposes.

q

Connect “A” to pin No.3 of the DDK connector and “B” to pin No.4.

w

Connect “A” and “B” lines from the DDK connector to the “5” and “2” terminals of the Master
Socket (LJU).

e

Connect SLT to the modular jack of the Master Socket (LJU).

NOTE : In this manual “T” and “R” on the PCB have been replaced with “A” and “B”, respectively, in the description.

WARNING

• Use a plier for

tightening wires
to DDK connec-
tors to prevent
from loose
wiring.

• SLT lines must

not be bundled
with key tel-
ephone lines or
exchange lines
outside the CCU.

• PF2 is not avail-

able.

Summary of Contents for VoiceSonic VB-9411AD































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands