Panasonic VoiceSonic VB-9411AD Page 124 Operation, Installation And Programming Download

Page: 124 / 158

P-30

PROGRAMMING (MODE 1)

0405#-(0 or 1)#

BACKGROUND MUSIC (BGM)

Sets BGM operation (#53) to enable or disable.

0#: BGM disable
1#: BGM enable

0406#-(0, 1-3)#

INFORMATION TONE FOR VOICE
CALLING, PAGING CALL

Set the information or alert tone for extensions called by
voice. The tone is sounded for 0.5 second before the
caller’s voice is heard.

0#: Tone for voice call and paging call
1#: Tone for voice call
2#: Tone for paging call
3#: No information tone

0407#-(0 or 1)#

Not Available

0408#-(0 or 1)#

Not Available

0409#-(0 or 1)#

LONG SPEECH ALARM

To prevent a long call, you can set the telephone to
sound an alarm at specified intervals during Exchange
line call.
To set an alarm or not:

0#: No alarm
1#: Alarm

NOTE : • The alarm sounds 2 minutes 30 seconds after

initiating a call, and continues to sound every 3
minutes afterward.

• Available for key telephone only.

0410#-(0 or 1)#

INTERNAL TONE/VOICE CALL (EXTEN-
SION)

When an extension is calling an other extension, the call
be invoked by voice or internal ringing tone.

0#: Extension call by voice
1#: Extension call using internal ringing tone

0411#-(0 or 1)#

OPERATOR CALL DIAL

You can call an operator from other extension by
dialling “0” or “9”.
To set the operator call dial number to “0” or “9”:

0#: “0” call (Exchange line Access 9)
1#: “9” call (Exchange line Access 0)

NOTE : • This setting automatically determines the outgo-

ing dial as follows.

• Leave it default for UK systems.

Operator call dial No.

Exchange line Access No.

Dial 0

Dial 9

0412#-(0 or 1)#

SYSTEM SPEED DIAL

To set the memory size for SSD to 90 or 200:

0#: 90 (2 digits 00-89)
1#: 200 (3 digits 000-199)

NOTE : Turn the power off and on of the CCU after the

programming to activate the new settings.

0413#-(0 or 1)#

MUSIC ON HOLD

While an Exchange line call is placed on hold, you can
send music to the other party.
To use an internal sound or external music source for
MOH:

0#: Internal sound
1#: External music source

Summary of Contents for VoiceSonic VB-9411AD































































































































































Search results

Summary of Contents for VoiceSonic VB-9411AD

Reviews:

Related manuals for VoiceSonic VB-9411AD

Brands by name

Popular brands

Panasonic VoiceSonic VB-9411AD, Operation, Installation And Programming

Search results

Summary of Contents for VoiceSonic VB-9411AD

Reviews:

Related manuals for VoiceSonic VB-9411AD

Brands by name

Popular brands