27
QR34642
Available Cards
Handling card
•
D
o not use cards other than
the designated ones.
•
Do not touch the card
terminal or allow it to touch
metal.
•
Do not paste anything other
than exclusive label on label pasting portion.
•
Do not subject card to impact, bend card or drop
it.
•
Do not disassemble card or modify it.
•
Do not expose card to water.
•
Do not use or store card in the following places:
−
Where the temperature is high, such as in
vehicle at high temperatures, in direct sunlight
or near a heater.
−
Where humidity is high, or in dusty place
•
When the erasure prevention switch on SD
Memory Card is locked, no recording, deletion or
editing will be possible on the card.
•
It is recommended that you create a backup file
for valuable data on hard disk of PC.
•
Do not do the following, or the data on card may
be damaged or lost:
−
Do not remove the card or turn DVD
Palmcorder off during reading or writing of
data
−
Do not use DVD Palmcorder in a place subject
to static electricity or electrical noise
Note
:
•
This DVD Palmcorder can play back image data recorded
on other digital cameras conforming to the DCF (Design
rule for Camera File system) standard which were
established by the Japan Electronics and Information
Technology Industries Association (JEITA). The range of
image data playable on this DVD Palmcorder is that with
pixels from 80 horizontal × 60 vertical to 4000 horizontal
× 3000 vertical.
•
DCF is an integrated image file format of digital cameras:
Image files can be used on all digital devices conforming
to DCF.
•
Image data edited on PC and certain types of image data
may not be visible on this DVD Palmcorder.
•
The image data recorded on another device may not be
playable on this DVD Palmcorder.
SD Memory Card
and
MultiMediaCard
can be used on
this DVD
Palmcorder.
Terminal
Erasure prevention
switch
Locked status
VDR-M30PP_GB.book Page 27 Friday, March 14, 2003 8:53 PM
