152
QR34662
Card has no data.
This message will appear when the
button is pressed with a
card inserted on which no still is recorded. (It will appear if you
attempt playback or editing on Disc Navigation, but will not appear
if you press
on camera through image.)
Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
Palmcorder, choose “YES” and format it.
129
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
130
•
Use another disc.
•
See *3 on page 156.
24, 78
COPY PROTECTED
The video signal input to this DVD Palmcorder may be copy-
guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
Copy-guarded materials cannot be recorded on this DVD
Palmcorder.
68
DISC ACCESS
The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD Palmcorder.
52, 55
This DVD Palmcorder is verifying whether the correct disc has been
inserted.
Wait until the message disappears, and you can start to use the
DVD Palmcorder.
This message will be displayed for a little longer when the date
changes.
DISC ALMOST FULL
The disc will soon be full, and recording will be impossible.
Delete unnecessary scenes and try the disc again, or use another
disc.
28, 29, 103
Disc error has occurred.
Finalizing is not
complete.
•
Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
•
See *3 on 156
131
Disc error has occurred.
Format the disc now?
•
Has the disc been initialized on PC? Has initializing the disc on
PC been interrupted?
Choose “YES” and initialize the disc when using it on this DVD
Palmcorder. Initializing the disc will erase all data on it.
•
See *2 on page 156.
129
Disc error has occurred.
Formatting is not
complete.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before reusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
78, 129
Disc error has occurred.
Keep disc inside &
restart.
Disc error could have occurred during editing of scenes.
Turn off the DVD Palmcorder with the disc being used in it, connect
AC adapter/charger, and then power the DVD Palmcorder again.
Repair of scenes will be tried.
42
Message
Cause & Troubleshooting
Reference
page
VDR-M30PP_GB.book Page 152 Friday, March 14, 2003 8:53 PM
