72
QR34662
Jumping to Specified Point (Go To)
1
Press the MENU button
during playback.
2
Choose the option (point
you want to go to), and
then press the
button.
Top
: To go to the start, and enter playback
pause.
End
: To go to the end of last scene, and enter
playback pause.
Specify : To go to a specified point and enter
playback pause. See the following for
details.
●
Specifying the point to view
1
Choose “Specify” in step 2 above, and then press
the
button.
The screen for specifying the point to go to will
appear.
2
Use the joystick to select the desired time of
chosen point.
: To select the start.
: To select the end.
:
·
Press once: To move the cursor in 10-
second units (1-still units
for card)
·
Hold down: To move the cursor in 1-
minute units (10-still units
for card)
3
Press the
button to enter the selection.
The DVD Palmcorder will go to the specified
point and enter the playback pause status.
To cancel the “Go To” procedure midway, press the
button before going to the specified point.
Note
:
•
If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing “Top” will jump to
the beginning of selected scenes (P. 127).
•
When multiple scenes are selected, the total time of
selected scenes will appear in the “total recording time”
display.
•
When card is loaded, the number of stills will appear.
•
The cursor may not move at same-pitch intervals.
Go T o
RAM
ENTER
RETURN
En d
S p e c i f y
To p
Go t o
TOP
END
ENTER
CANCEL
GO TO
0 : 00 : 00
0 : 24 : 24
0 : 03 : 26
0 : 03 : 26
TOP
END
CURRENT
Position of currently
played back image
Total recording time of
all selected scenes
Cursor
Cursor position
Go t o
TOP
END
ENTER
CANCEL
TOP
GO TO
END
CURRENT
0 : 0 0 : 00
0 : 00 : 00
0 : 24 : 24
0 : 03 : 26
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
VDR-M30PP_GB.book Page 72 Friday, March 14, 2003 8:53 PM
