94
QR34662
Initial Settings
Switching Operating Sound On or Off (Beep)
This DVD Palmcorder will emit sound when the power switch is changed over, the REC button is pressed,
or other operations are engaged. If you do not need operating sound, you can switch it off.
1
Press the MENU button,
choose “Beep” on the
“Initial Setup” menu
screen, and then press the
button.
2
Select “On” or “Off”, and then press the
button.
3
Press the MENU button to end the setting.
Note
:
The “Beep” setting will be stored in memory even when the
DVD Palmcorder is turned off.
Turning DVD Palmcorder Off Automatically (Power Save)
This DVD Palmcorder is equipped with power save function. Specify “Power Save: On”: If the DVD
Palmcorder is left in the recording pause status without being operated for 5 minutes, it will automatically
turn off to prevent the battery pack from discharging needlessly.
1
Press the MENU button,
choose “Power Save” on
the “Initial Setup” menu
screen, and then press the
button.
2
Select “On” or “Off”, and
then press the
button.
3
Press the MENU button to end the setting.
Note
:
•
To turn the DVD Palmcorder on again from automatic off
activated by the power save function, set the power
switch to “POWER OFF”, and then set it to “
VIDEO”,
“
PHOTO” or “
PHOTO”
•
The Power Save setting will not appear in the on-screen
information display.
•
The Power Save setting will be stored in memory even
when the DVD Palmcorder is turned off.
Setting
Content
On
Beep is heard
Off
No beep is heard
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
ENTER
RETURN
Re s e t
L a n g u a g e
R e c o r d LED
Setting
Content
On
To engage power save
Off
To cancel power save
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
R e c o r d LED
ENTER
RETURN
Re s e t
L a n g u a g e
VDR-M30PP_GB.book Page 94 Friday, March 14, 2003 8:53 PM
