Panasonic VARICAM LT, Operating Manual

Page: 69 / 182

– 69 –
Chapter 5 Operation — HOME screen
[SYSTEM] Sets the camera’s system.
[CAM INDEX & REEL CNT]
Sets [CAM INDEX] and [NEXT REEL CNT].
[CAM INDEX]: Sets [CAM INDEX].
[NEXT REEL CNT]: Sets [NEXT REEL CNT].
[SYSTEM MODE]
f
[FREQUENCY] Sets the system frequency.
f
[MAIN PIXEL] Sets the camera’s main resolution (number of pixels).
f
[MAIN CODEC] Sets the main recorder’s codec.
The basic system of the camera is determined by three settings of
[FREQUENCY]/[MAIN PIXEL]/[MAIN CODEC]. Restarting the system may be
necessary if basic system settings are changed.
After confirming the three settings, restart in accordance with the guide.
f
[PROXY CODEC] [PROXY CODEC]: Sets the proxy codec to be recorded in the main recorder
and the sub recorder.
[VFR SUB REC]: Selects either [NORMAL + Audio] or [VFR up to 60p (50p)].
f
[NORMAL + Audio]: Records in the frame of system frequency. Audio signal is
also recorded.
This cannot be selected when [PROXY SLOT] is set to [MAIN & SUB] or
[MAIN].
f
[VFR up to 60p (50p)]: Records in a variable frame rate by synchronizing to
the [VFR] setting of the main recorder. Audio signal is not recorded when
[VFR] is set to [ON].
This cannot be selected when [MAIN PIXEL] is set to [2048
× 1080 CROP] or
[1920 × 1080 CROP].
[PROXY SLOT]: Sets the slot to record the proxy video.
f
[MAIN & SUB]: Records to both the main recorder and the sub recorder.
f
[MAIN]: Records only to the main recorder.
f
[SUB]: Records only to the sub recorder.
[AUDIO] Sets the audio input and recording.
[AUDIO VOL]: Sets the input volume.
[AUDIO IN]: Sets input channel switching and level control.
[AUDIO OUT]: Sets the output to a speaker or headphone.
[WB] Sets the color temperature (white balance).
Selects from the predefined white balance value.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DELETE].
[AWB]
Executes automatic white balance.
The execution results are automatically registered as one list of 12 items.