Panasonic VARICAM LT, Operating Manual

Page: 113 / 182

– 113 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[USER GRIP2] Sets the function to be assigned to the <USER GRIP2> button of the grip module.
[INHIBIT], [SIX USER BUTTONS], [AWB], [Y GET], [EXPAND1], [EXPAND2], [IN COLOR F.A.],
[SQ. F.A.], [MONO F.A.], [WFM], [BARS], [ONE PUSH A. IRIS], [FALSE COLOR], [ZEBRA], [VF SDI
COLOR], [SDI OUT 1 COLOR], [SDI OUT 2 COLOR], [VF SDI CLEAN], [VF SDI MARKER], [VF SDI
DESQUEEZE], [VF SDI IMAGE INVERT], [SMOOTH MODE], [TEXT MEMO], [SHOT MARK], [REC SW]
Even if [BARS] is assigned, this item will not operate when [MAIN PIXEL] is set to [2048 × 1080 CROP]/
[1920 × 1080 CROP].
f
Factory setting: [INHIBIT]
[SIDE LOCK] [REC(FRONT)] Sets if the <REC> button on the camera is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [UNLOCK]
[USER1/PLAY] Sets if the <USER1>/<PLAY> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[USER2/INFO] Sets if the <USER2>/<INFO> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[USER3/EXT] Sets if the <USER3>/<EXT> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[IRIS/SEL] Sets if the <IRIS/SEL> is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[MENU] Sets if the <MENU> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[SYS CHECK] Sets if the <SYSTEM CHK> button is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[TOGGLE] Sets if the <TOGGLE/WB> is to be locked or not with the <LOCK> switch on the camera.
[LOCK]: It will be locked.
[UNLOCK]: It will not be locked.
f
Factory setting: [LOCK]
[CARDS/MEDIA] [FORMAT MEDIA] Formats the card in the specified slot after the format menu is selected.
[MAIN SLOT], [SUB SLOT]
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
[MEDIA END ALARM] Sets if the alarm is to be sounded when there is no remaining capacity in the memory card.
[ON], [OFF]
f
Factory setting: [ON]
[POWER
MANAGEMENT]
[DC IN SOURCE] Sets the type of the external power supply input into the <DC IN> terminal.
[DC POWER SUPPLY]: Selected when connecting an AC adaptor. In this case, the remaining battery
charge level is not displayed.
[BATTERY]: Selected when connecting a battery to the <DC IN> terminal. Remaining charge level is
detected from the voltage level.
f
Factory setting: [DC POWER SUPPLY]
[DC IN BATTERY
SETTINGS]
Following items are settings for the external battery connected to the <DC IN> terminal.
[- FULL VOLT] Sets the voltage to be displayed in the remaining charge level full display when an external battery is input
from the <DC IN> terminal.
[13.0V] - [17.0V]
(0.1 V step)
f
Factory setting: [15.5V]
[- NEAR END VOLT] Sets the remaining charge level near end voltage when an external battery is input from the <DC IN>
terminal.
[11.0V] - [15.0V]
(0.1 V step)
f
Factory setting: [13.2V]
[- END VOLT] Sets the remaining charge level end voltage when an external battery is input from the <DC IN> terminal.
[11.0V] - [15.0V] (0.1 V step)
f
Factory setting: [12.5V]
[ONBORD BATTERY
SETTINGS]
Following items are settings for the external battery connected to the battery holder.
[- BATTERY SELECT] Selected according to the battery used.
[DIONIC], [HyTRON], [ENDURA], [PAG]: The remaining charge level is detected and a warning is
displayed according to the [- NEAR END INFO] and [- END VOLT] settings. When there is no remaining
charge level information, the remaining charge level is detected from the voltage level.
[other]: Remaining charge level is detected from the voltage level.
f
Factory setting: [DIONIC]