Panasonic VARICAM LT, Operating Manual

Page: 171 / 182

– 171 –
Chapter 12 Maintenance — Warning system
Viewfinder status display Description Behavior and cause
[REC WARNING]
Displayed when attempting to record in excess of the
maximum total number of clips allowed for one P2 card.
f
Warning lamp flashes four times per second during
continuous recording.
f
The operation will stop.
f
[REC WARNING!] [OVER MAX# CLIPS] will be
displayed on the warning display when opening the
[DIAGNOSTICS] screen from the INFO screen.
f
Replace the P2 card or delete unnecessary clips.
[REC WARNING]
Displayed when an error occurs in recorded data during
recording.
f
Warning lamp flashes four times per second during
continuous recording.
f
The operation will continue or stop.
f
[REC WARNING!][REC DATA] will be displayed on the
warning display when opening the [DIAGNOSTICS]
screen from the INFO screen.
f
Turn off the power and on before using it again.
[RUN DOWN CARD]
The maximum number of overwrites has been
exceeded.
f
The current operation will continue.
f
Replacement of the P2 card is recommended.
[TEMPORARY PAUSE]
Recording is temporary suspended due to correct
recording not possible because of the disruption of input
signal from the <GENLOCK IN> terminal. The clip will
be divided.
f
Warning lamp flashes four times per second during
continuous recording.
f
The operation will pause.
f
Recording will resume when the signal returns to
normal.
[CINE STYLE DISABLED!]
CAM INDEX/REEL number cannot be recorded as a
file name.
f
Use the expressP2 memory card or Class10 or higher
SDXC memory card.
[SUB SLOT REC DISABLED!]
Recording is not possible because there is no media in
the sub slot.
f
Insert a medium in the sub slot or change the
recording destination of the proxy file to the main slot
only.
When noticing with dedicated display or lamp
Attaching the electronic HD color view finder AU-VCVF10G (optional) will indicate warnings for battery and media with the lamp on the viewfinder.
Viewfinder status display Description Behavior and cause
Battery lamp and warning lamp flashes
[EMP] is displayed on either or both
remaining battery level information.
Battery is consumed.
f
Recording and playback operation will be stopped.
f
Alarm will continue to be output.
f
Replace the battery.
When remaing battery connected to the <DC IN>
terminal has run out, attach a battery with sufficient
level to the battery holder.
It will automatically switch to the battery holder and
warning will stop. It will be same for the opposite case.
Battey lamp and warning lamp flashes once
per second.
Either or both remaining battery level
information will flash.
Battey is almost consumed.
f
Recording and playback will continue.
f
Refer to the instructions when battery is consumed.
Warning lamp flashes
[END] is displayed on either or both
remaining media space information.
There is no more space on the recording media in the
main slot or the sub slot.
f
Recording will be stopped.
f
Alarm will continue to be output.
f
Delete clips in the recording media or insert a new
recording media.
Warning lamp will flash once per second
during recording.
Either or both remaining media space
information will flash.
The remaining space on the recording media in the
main slot or the sub slot is low.
f
Recording will continue.
f
Replace P2 card if required.
During thumbnail and menu operation
Display Description Behavior and cause
[CANNOT ACCESS!]
Data cannot be accessed due to a content defect or
some other reason.
Ensure the health of the media and the clips.
[CANNOT DELETE!] The content versions do not match. Cannot delete. Match the device and contents version.
[CANNOT FORMAT!]
A P2 card problem or some other reason prevents
formatting.
Check the P2 card.
[CANNOT REPAIR!] Content that cannot be repaired is selected. Check the selected content.
[CANNOT SAVE! FILE NAME IN USE]
A settings file of the same name exists on the SD
memory card.
Use another name to save the file.
[CARD FULL!] The P2 card or SD memory card is full. Insert a card with free space available.
[INVALID VALUE!] The data value you entered is invalid. Enter data within the normal range.
[MISSING CLIP!]
Shot marks cannot be attached to the clips unless all
clips recorded over multiple P2 cards are present.
The camera cannot handle a clip recorded over multiple
cards.
[NO CARD!] No P2 or SD memory card is inserted. Insert the relevant media.
[NO FILE!] The specified file does not exist. Check the file.
[NO INPUT!] No data is entered. Enter data and then set.
[NO SD CARD!] No SD memory card. Insert an SD memory card.
[UNKNOWN CONTENTS FORMAT!]
This is a warning of the contents for the version that is
not supported by the camera.
Match the device and content versions.