Panasonic VARICAM LT, Operating Manual

Page: 122 / 182

– 122 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[P16(PHASE)] Corrects the hue between magenta and “between magenta and red”.
[
−
63] - [63]
f
Factory setting: [0]
[P17(SAT)] Corrects the color saturation between magenta and red.
[ − 63] - [63]
f
Factory setting: [0]
[P17(PHASE)] Corrects the hue between magenta and red.
[ − 63] - [63]
f
Factory setting: [0]
[P18(SAT)] Corrects the color saturation between “between magenta and red” and red.
[ − 63] - [63]
f
Factory setting: [0]
[P18(PHASE)] Corrects the hue between “between magenta and red” and red.
[ − 63] - [63]
f
Factory setting: [0]
[REC SETTINGS]
The various setting items of the recording function of the camera.
Item Description of settings
[FILE NAME STYLE] Sets the format of the file name.
[CINE]: Records CAM INDEX/REEL number as the file name.
[P2]: Records the file name as a format unique to P2.
[MENU] → [REC SETTINGS] → [REC METADATA] → [USER CLIP NAME] is fixed to [TYPE3] when set
to [CINE].
f
Factory setting: [CINE]
[REC FUNCTION] [REC MODE] Selects the special recording function.
[NORMAL]: Normal recording
[INTERVAL]: Interval recording (function to perform intermittent recording in constant interval)
[ONE SHOT]: One-shot recording (function to perform recording of specified duration every time the
<REC> button is pressed)
It is fixed to [NORMAL] when [MENU] → [CAMERA SETTINGS] → [FPS] → [VFR SW] is set to [ON].
f
Factory setting: [NORMAL]
[REC TIME] Sets the recording duration of single one-shot recording.
[00s01f] - [59s23f]
The maximum value of the frame digit differs depending on the system frequency.
f
Factory setting: [00s01f]
[INTERVAL TIME] Sets the intermittent recording frequency of single interval recording.
[0h00min00s02f] - [1h00min00s00f]
f
Factory setting: [0h05min00s00f]
[START DELAY] Sets the delay time to start recording for the interval recording and the one-shot recording.
[0s] - [10s]
f
Factory setting: [0s]
[PRE REC MODE] Selects the pre-recording (function to record few seconds earlier than when the <REC> button is pressed
by accumulation into the internal memory).
[ON], [OFF]
The setting is fixed to [OFF] when [REC MODE] is set to [INTERVAL] or [ONE SHOT].
f
Factory setting: [OFF]
[TC] [SET TC] Sets the default value of the time code to record.
Hour: [00] - [23]
Minute:
[00] - [59]
Second: [00] - [59]
Frame:
[00] - [23]
(for [24p], [23.98p]),
[00] - [24]
(for [50i], [50p], [25p]),
[00] - [29]
(for [59.94i], [59.94p],
[29.97p])
f
Factory setting: [00] (various items)
[SET UB] Sets user bits. Enabled only when [USER] is selected in [UB MODE].
This can be set by each digit from [00] to [FF].
f
Factory setting: [00]
[TC/UB/Dur.] Switches the time code display to the user bits and duration counter display.
The duration counter is not displayed during the playback.
[TC], [UB], [Dur.]
f
Factory setting: [TC]
[FREE/REC RUN] Sets the operation mode to advance the built-in time code generator. It will be fixed to [REC RUN] when
[MENU] → [CAMERA SETTINGS] → [FPS] → [VFR SW] is set to [ON].
[FREE RUN]: Advances regardless of the operation mode.
[REC RUN]: Advances when recording is in process.
f
Factory setting: [FREE RUN]
[DF/NDF] Sets count method for the built-in time code generator of the camera.
[DF]: Uses the drop frame mode.
[NDF]: Uses the non-drop frame mode.
f
Factory setting: [NDF]
Enabled only when [59.94i], [59.94p], or [29.97p] is selected in [MENU] → [SYSTEM SETTINGS] →
[SYSTEM MODE] → [FREQUENCY].