Panasonic VARICAM LT, Operating Manual

Page: 68 / 182

– 68 –
Chapter 5 Operation — HOME screen
HOME screen
The Home screen displays the basic camera settings and is used to change those settings.
[FPS] Sets the frame rate.
Selects from the predefined frame rate.
Up to 150 (128 for [25.00p]/[50.00p]) can be registered.
Presets can be added/deleted using [ADD]/[DELETE].
[VFR]
Toggles the variable frame rate.
When this is [OFF], the frame rate become 1x the rate set in [MENU] →
[SYSTEM SETTING] → [FREQUENCY].
f
Perform recording at the frame rate set in [FPS] when [ON]. Audio cannot be
recorded.
Audio can be recorded on the sub recorder side when [NORMAL
+ Audio] is
selected in [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [VFR
PROXY REC].
In this case, the sub recorder is in normal recording (frequency set in
[SYSTEM MODE] → [FREQUENCY]) rather than recording at a variable
frame rate.
[COLOR] Sets the video colors (gamma and gamut).
[MAIN COLOR]
Sets the color of main codec video to be recorded in the main recorder.
[PROXY COLOR] Sets the color of proxy codec video to be recorded in the main recorder and the
sub recorder.
[Grading SEL] Sets the grading function.
[MAIN COLOR] is only enabled in [V-Log] mode.
Use the color data (3D LUT and CDL) inside the camera recorder by selecting
[Internal].
Color data that is set from the grading application connected to the network can
be used by selecting [External App].
[3D LUT] Sets the grading in the [3D LUT].
[Grading SEL] is disabled when this is [OFF].
Reads from the SD memory card when [Grading SEL] is set to [Internal].
The 3D LUT data is set from the grading application connected to the network
when [Grading SEL] is set to [External App].
[CDL] Sets the grading in [CDL].
[Grading SEL] is disabled when this is [OFF].
When [Grading SEL] is set to [Internal]
f
Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.
f
Reads from the SD memory card using [File Load].
The CDL data can not be changed during recording when [Grading SEL] is set
to [Internal]. The data can be changed from the grading application even while
recording when [External App] is set.
The CDL data is set from the grading application connected to the network
when [Grading SEL] is set to [External App].
[SDI SET] Sets the display color for [SDI OUT 1]/[SDI OUT 2]/[VF].
The settings can only be changed when [MAIN COLOR] is set to [V-Log].
[SHUTTER] Sets the shutter speed.
Selects from the predefined shutter speed.
Up to 12 can be registered.
Presets can be added/deleted using [ADD]/[DELETE].
[ON]/[OFF]
It will be shutter off (opening angle 360 deg) when set to [OFF].
[deg/sec] Determines the shutter setting unit.
[deg]: Open angle
[sec]: Second
[EI] Sets the EXPOSURE INDEX (gain).
[dB/ISO]
Selects the setting method.
[NATIVE ONLY] Only the native ISO can be selected. (when [ISO] is set)
[800BASE] The ISO800 standard value can be selected. (when [ISO] is set)
[5000BASE] The ISO5000 standard value can be selected. (when [ISO] is set)
[NORMAL] Sets [GAIN MODE] to [NORMAL]. (When [dB] is set)
[HIGH] Sets [GAIN MODE] to [HIGH]. (When [dB] is set)