Panasonic VARICAM LT, Operating Manual

Page: 111 / 182

– 111 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[OFFSET-R] Sets the value of [OFFSET-R].
[ − 0.5] - [0.5] (0.01 step)
f
Factory setting: [0.00]
[OFFSET-G] Sets the value of [OFFSET-G].
[ − 0.5] - [0.5] (0.01 step)
f
Factory setting: [0.00]
[OFFSET-B] Sets the value of [OFFSET-B].
[ − 0.5] - [0.5] (0.01 step)
f
Factory setting: [0.00]
[POWER-R] Sets the value of [POWER-R].
[0.5] - [2.0] (0.01 step)
f
Factory setting: [1.00]
[POWER-G] Sets the value of [POWER-G].
[0.5] - [2.0] (0.01 step)
f
Factory setting: [1.00]
[POWER-B] Sets the value of [POWER-B].
[0.5] - [2.0] (0.01 step)
f
Factory setting: [1.00]
[SATURATION] Sets the value of [SATURATION].
[0] - [2.0] (0.01 step)
f
Factory setting: [1.00]
[SDI OUT 1] Sets the output image from the <SDI OUT 1> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
f
Factory setting: [V-Log]
[SDI OUT 2] Sets the output image from the <SDI OUT 2> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
f
Factory setting: [V-Log]
[VF SDI] Sets the output image from the <VF SDI> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
f
Factory setting: [V-Log]
[ANAMORPHIC
DESQUEEZE]
[PROXY & SDI OUT] Sets if the video to be recorded in the proxy and the SDI output video is to be de-squeezed.
[ON], [OFF]
f
Factory setting: [OFF]
[VF SDI] Sets if the output video from the <VF SDI> terminal is to be de-squeezed.
[ON], [OFF]
f
Factory setting: [OFF]
[DESQUEEZE RATIO] Sets the de-squeeze ratio.
[1.3x]:
De-squeeze 1.3 times in horizontal direction.
[1.3xmag]: It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 1.3
times in horizontal direction.
[2.0x]: De-squeeze 2.0 times in horizontal direction.
[2.0xmag]:
It will be in aspect ratio of 2.39:1 for mastering generated from the image de-squeezed 2.0
times in horizontal direction.
f
Factory setting: [1.3x]
[IMAGE INVERT] [PROXY & SDI OUT] Sets if the video to be recorded in the proxy and the SDI output video is to be inverted.
The thumbnail of the clip to be recorded in the main slot is reversed when set to [ON]. (The recorded video
is not reversed.)
[ON], [OFF]
f
Factory setting: [OFF]
[VF SDI] Sets if the output video from the <VF SDI> terminal is to be inverted.
[ON], [OFF]
f
Factory setting: [OFF]
[INVERT SELECT] Sets the type of inversion.
[HORIZONTAL]: Invert horizontally
[VERTICAL]: Invert vertically
[180° ROTATE]: Invert vertically and horizontally
f
Factory setting: [HORIZONTAL]