Panasonic Urban Multi MX1R Series, Service Manual, Page: 115 / 643

Test Operation PACD011001C2
94 Test Operation Urban Multi “MX1, ME1 Series” Using R-22
1.11 Low Noise / Demand Operation (MX1 Series)
BMS interface adaptor for outdoor unit is required for each low noise and demand control zone.
„
By using a separate BMS interface adaptor for outdoor unit and setting the outdoor unit address (setting
mode 2) for each low noise and demand control zone, demand and low noise operation is carried out in
accordance with contact input received from the adaptor in each zone.
„
Outdoor unit address setting (Setting mode 2; see page 69.)
„
BMS interface adaptor for outdoor unit address setting
‹
Decide and set demand address 0 - 31 for each demand and low noise control zone. (See fig. below.)
‹
Set SS1 to “BOTH” (factory set) or “C / H.”
F1 / F2
Demand address
¡llllll
(F1 / F2)
BMS interface
adaptor for
outdoor unit
F1 / F2 F1 / F2
DS2·DS1
No. 0
F1 / F2 F1 / F2
Demand address
¡lllll¡
(F1 / F2)
BMS interface
adaptor for
outdoor unit
F1 / F2 F1 / F2
DS2·DS1
No. 1
F1 / F2 F1 / F2
Demand address
¡llll¡l
(F1 / F2)
BMS interface
adaptor for
outdoor unit
F1 / F2
DS2·DS1
No. 2
(VL030)