![background image](http://html.mh-extra.com/html/panasonic/toughbook-cf-48-series/toughbook-cf-48-series_reference-manual_264557057.webp)
57
No display after powering
on
The power has not been
turned off, but after a cer-
tain period of time, there
is no display
When the battery pack is
u s e d , t h e s c r e e n i s
darker than when the AC
adaptor is connected
The cursor cannot be
controlled properly
An afterimage appears
(e.g., green, red, and blue
dots remain on the dis-
play) or there are dots not
displaying the correct
colors
Dealing with Problems
(Advanced)
When there is no display to an external display,
• Check your cable connection to the external display.
• Confirm your display is powered on.
• Check the settings for your external display.
Try switching the display by pressing
Fn
+
F3
.
If you want to switch the display destination repeatedly by pressing
Fn
+
F3
,
make sure that the display destination has switched completely each time before
pressing
Fn
+
F3
again.
When displaying only through an external display, if the computer is shut down by
using the standby or hibernation function, there will be no display on the LCD
unless the external display is connected when operations are resumed. In this
case, connect the external display or press
Fn
+
F3
.
Has the computer been set to the power-saving mode?
To resume operation of your computer from the condition the power of the display
is off (for energy conservation purposes), press any key unrelated to the direct
triggering of a selection, like
Ctrl
.
To save power, your computer may have automatically entered the standby mode
(power indicator blinks green) or hibernation mode (power indicator turns off). In
such cases, press the power switch.
Press
Fn
+
F2
and adjust the brightness. Note, however, that when the bright-
ness is increased, the battery running time will become shorter.
Brightness can be set to separate levels for when the AC adaptor is connected and
when it is disconnected.
If you are using an external mouse, ensure that the external mouse has been
connected correctly.
Restart the computer by using the keyboard (Press ,
U
, and select
[Restart] with , then press
Enter
).
If the computer does not respond to keyboard commands, read “No response”
(
page 62
).
If an image is displayed for a prolonged period of time, an afterimage may appear. This is
not a malfunction. The afterimage will disappear when a different screen is displayed.
High-precision and advanced technologies are necessary in the production of color
liquid crystal displays (color LCDs). Therefore, if 0.002% or less of the picture
elements either fail to light or remain constantly lit (that is, more than 99.998% of
elements are functioning properly), no defect is considered to exist.
Display
When the previous item
is not the cause
Press
F9
in the Setup Utility (
page 48
). This will restore the Setup Utility’s
settings to their default values (except the password settings).
Try removing all peripheral devices.
Check a disk error using the following procedure.
1
Display [Local Disk (C:) Properties].
Windows 2000
Select [Local Disk(C:)] with the right button in [My Computer], and select [Prop-
erties].
Windows XP
Select [Local Disk(C:)] with the right button in [start] - [My Computer], and select
[Properties].
2
Select [Tools] - [Check Now].
3
Select [Start] after selecting required items in [Check disk options].
At startup, hold down
F8
when [Panasonic] boot screen disappears, and release
your finger when the Windows Advanced Option Menu is displayed. Start the
computer in Safe Mode, and confirm the details of the error.
Starting Up (continued)