14
Security Measures
Setting the Supervisor Password
(enabling, changing, disabling)
1
Run the Setup Utility
(
page 48
)
2
Using either or , select [Security]
3
Using either or , select [Set Supervisor Password] and
press Enter
4
<Only when the Supervisor Password has been set>
Enter your password at [Enter Current Password] and press
Enter
5
Enter your password at [Enter New Password] and press
Enter
To disable the Supervisor Password
Press only
Enter
6
Re-enter your password at [Confirm New Password] and press
Enter
To disable the Supervisor Password
Press only
Enter
7
At [Setup Notice], press Enter
8
Press F10 and select [Yes], then press Enter
Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
•
There is no distinction between upper and lower case letters.
•
Use only the upper horizontal row of numeric keys to input your password.
•
Do not input your password while holding down
Shift
or
Ctrl
.
Disabling the Supervisor Password also disables the User Password.
NOTE
Do not forget your password. If your Supervisor Password is forgotten you
will be unable to use your computer. Contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a short
time, as the possibility exists for the password to be set/changed by another
person.
CAUTION
