Panasonic Toughbook CF-48 Series Reference Manual Download Page 54

Page: 54 / 64

DMI Viewer

Windows 2000

Select [DMI Viewer] from [Start] - [Programs] - [Panasonic]

Windows XP

Select [DMI Viewer] from [start] - [All Programs] - [Panasonic]

The screen shown below is displayed.
When you click on an item, detailed information on that item will be displayed.

This computer conforms to the specifications of the Desktop Management Interface
(DMI). The DMI Viewer can be used when you want to know information on the inter-
nal systems this computer supports, starting with the CPU and memory.

Displayed information can be saved to a text file (.txt). Run the DMI Viewer and
display the information you wish to save.

To save the item that is displayed

Select [Save Selected Data] from [File] menu.

To save all items

Select [Save All Data] from [File] menu.

Select the folder, input the file name, and select [Save]

Running DMI Viewer

Saving Information to a File

Summary of Contents for Toughbook CF-48 Series

































































Search results

Summary of Contents for Toughbook CF-48 Series

Reviews:

Related manuals for Toughbook CF-48 Series

Brands by name

Popular brands

Panasonic Toughbook CF-48 Series, Reference Manual

Search results

Summary of Contents for Toughbook CF-48 Series

Reviews:

Related manuals for Toughbook CF-48 Series

Brands by name

Popular brands