background image

93

Technical Information

Close the communications software before using the power saving function.

z

If the power saving function (sleep or hibernation) is activated while communications software is used, the network con-
nection may be interrupted, or the performance may be adversely affected. In this case, restart the computer.

z

In a network environment, set [Never] for [Put the computer to sleep] and [Hibernate after] (

Î

page 13

).

Computrace

®

 software tracks your stolen computer.

z

Computrace

®

 software is not included in this computer.

z

Refer to the following URL for Computrace

®

 software for installation and available service regions. Note that this service is 

only available in certain regions. 
http://www.absolute.com

NOTE

z

Consult Absolute Software Corp. before disposal.

The Windows files included in the Windows 7 DVD-ROM are contained in the following folders:
c:\windows\support\migwiz, c:\windows\support\tools, c:\windows\support\logging

The COM ports of the computer are assigned as below.

z

COM1 : Serial Port A

z

COM2 : Serial Port B (Port replicator

*1

/Car mounter

*1

)

z

COM3 : GPS

*1

*1

Optional

If you change the assignment, the serial devices may not work properly.

Network Connections and Communications Software

Computrace

®

 software

About Windows-related files

Serial Devices

Summary of Contents for Toughbook CF-30C3DAZBM













































































































Reviews: