![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-30c3dazbm/toughbook-cf-30c3dazbm_reference-manual_4207541064.webp)
64
Disabling/Enabling Wireless Communication
<Only for model with wireless LAN, and/or wireless WAN>
There are 5 ways of disabling and enabling wireless communication.
z
The wireless switch on the front of the computer (below)
z
Wireless Switch Utility (
)
z
Settings in the Network and Sharing Center (
z
Settings in the [Advanced] menu of the Setup Utility (
)
z
Setting in the Wireless Connection Disable Utility (
NOTE
z
For further information about Wireless LAN: (
)
z
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
z
The wireless communication can be enabled or disabled by connecting or disconnecting the LAN cable. (
)
To disable all wireless communication
1
Switch (A) to OFF.
To enable wireless communication
1
Switch (A) to ON.
z
In the default setting, the wireless switch enables all wireless devices when it is
set to ON.
To check the wireless communication status
1
Click
on the notification area and place the cursor over the Wireless Switch Utility
icon (
or
).
A tool tip appears.
NOTE
z
If you uninstall the Wireless Switch Utility, set the wireless switch to ON beforehand.
z
Do not turn on/off the switch repeatedly at too short intervals.
z
Do not restart, log off, or enter sleep or hibernation immediately after turning on/off the switch.
z
Do not turn on/off the switch while Windows is starting up.
z
To use wireless communication, set the wireless devices ([Wireless LAN] / [Wireless WAN]) to [Enabled] (default) in
the [Advanced] menu of the Setup Utility (
The Wireless Switch