78
English
3 [Picture by picture] detailed settings
■
[Picture location]
Set the display position of the screen.
[Upper/Lower] / [Left/Right]
■
[Input(Upper)], [Input(Lower)] or
[Input(Left)], [Input(Right)]
Set the input to display on the screen.
[HDMI1] / [HDMI2] / [DisplayPort] / [
DVI-D
] / [SLOT]
/ [PC]
■
[Sound output]
Set the terminal to output audio.
[Off] / [Upper] / [Lower] (or [Left] / [Right]) /
[AUDIO IN1] / [AUIDIO IN2]
Note
●
The multi input display does not support interlace
signal.
Portrait settings
This function displays input images by rotating 90°.
Note
●
Set to the input other than [Screen Transfer] /
[MEMORY VIEWER] / [WHITEBOARD], and then set
[Portrait settings].
●
For video or picture you want to display, use the ones
with16:9 resolutions.
●
About playing back with USB input, refer to “Using
“USB media player”” (see page 128).
●
While this menu is displayed, aspect mode will be
[16:9].
[Portrait settings] - submenu screen
Portrait settings
Portrait display
No. of displays
Display format
Bezel adjustment
Location
Off
3
Mode 1
0
1
■
[Portrait display]
[Off]:
Disables portrait display.
[On]:
Enables portrait display.
When it is set to [On], aspect mode will be [16:9].
■
[No. of displays]
Set the number of displays comprising the portrait
display.
1, 3
■
[Display format]
[Mode 1]:
Displays images without missing portion, however,
some portion of the input images on the right and left
is cut.
[Mode 2]:
Displays the entire input images, however, some
portion of the images on top and bottom is not
displayed.
[Mode 3]:
Displays the entire input images so that the image is
displayed without missing portion.
Note
●
[Mode 1] and [Mode 2] keep the aspect ratio 16:9 but
[Mode 3] doesn’t.
■
[Bezel adjustment]
Adjusts the area of image hidden in the joint area on
the portrait screen.
0 to 100
■
[Location]
Assign the positions of portrait screens.
1 to 3
Portrait screen display example
1
2
3
•
When [Portrait display] is set to [Off], the enlarged
position can be confirmed on the screen if [No. of
displays] is set to [3].
Note
●
The settings are memorised separately for each input
terminal.
●
It is possible to set [Display format], [Bezel
adjustment] and [Location] when [No. of displays] is
[3].
●
This menu will be greyed out and cannot be set under
the following conditions.
•
When [USB media player settings] - [Schedule play
function] is [Enable] (see page 100)
●
When [Portrait display] is [On], the aspect mode
cannot be changed. (see page 36)
