135
English
Resume Play function
After Media Player ends, the file to be played back next
time varies depending on the setting of [USB media
player settings] - [Resume play].
When set to [On]:
The file played prior to the end of Media Player starts
playing from the beginning.
When set to [Off]:
Play starts from the beginning of the first file of the
scenario.
Note
●
The resume play function is retained until the unit is
turned off or the USB memory device is taken out.
Playlist edit function
This function creates and edits a scenario file for the
USB media player. Select [Setup] – [USB media player
settings] – [Playlist edit] to select the desired content,
set the playback order and play time, and output the file
(scenario.dat) to the USB memory device.
Note
●
Descriptions for the scenario (scenario.dat) are
restricted by the USB media player.
●
After the playlist is edited, “Single Media Player (Type
2)” operates.
●
If a scenario file (scenario.dat) already exists in the
USB memory device, delete it, and create a new one.
●
If a file list file (filelist.dat) already exists in the USB
memory device, delete them.
●
While editing the playlist, the following functions are
disabled.
[Position]
[Sound]
[Picture]
[Setup]
- [Signal]
- [Input label]
- [Power management settings] -
[No signal power off]
- [Image settings] - [Read user image]
- [Multi display settings]
- [Function button settings]
- [Failover/Failback]
- [Audio input select]
[Digital zoom]
●
The screen and audio quality while editing the playlist
is adjusted with the same content as that for the
MEMORY VIEWER input.
●
Editing the playlist requires 2 MB or more of space in
the USB memory device.
●
Use a USB memory device for which file reading and
writing can be normally performed.
●
Use the remote control for the playlist editing function
operation.
1. File selection screen
Select content files to play.
After selecting the files, press <6> to go to the next
editing screen.
Press the remote control buttons to perform the
following operations.
<VOL +> Selects content files. (Add a check mark on
the upper left of the thumbnail.)
<VOL -> Cancels content selection. (Delete a check
mark on the upper left of the thumbnail if
there is.)
Moves the focus.
<4> Deletes all the check marks.
<ENTER> Plays content files or moves to a
different hierarchy.
<RETURN> Finishes editing the playlist or moves to
a higher hierarchy.
<6> Goes to the next editing screen.
Note
●
If a scenario (scenario.dat) exists in the USB
memory device, it will be loaded automatically. If
applicable files are present, they are already in the
selected status on the content selection screen.
●
Up to 999 lines can be read from a scenario
(scenario.dat).
●
If a file list (filelist.dat) exists in the USB memory
device, it will not be loaded even if a scenario
(scenario.dat) is present, and then the content
selection screen appears with no content files
selected.
●
In addition to files immediately below root in the
USB memory device, files in folders can also be
selected.
●
A maximum of 999 content files can be selected.
●
If 999 files are selected, pressing <VOL +> for files
not selected cannot select such files.
●
When all the check marks are removed with <4>, a
confirmation screen is displayed before removal.
