7
English
Safety Precautions
WARNING
■
Setup
This LCD Display is for use only with the following
optional accessories.
•
3G-SDI Terminal Board
TY-SB01SS
•
Early Warning Software
(Basic license/3-year license):
ET-SWA100 series
*
*
: Suffix of the part number may differ depending on the
license type.
Note
●
The part number of the optional accessories are
subject to change without notice.
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.
•
The Display may fall off or tip over.
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
•
Dropping or falling of the unit may cause injury or
malfunction.
Caution - For use only with UL Listed Wall Mount
Bracket with minimum weight/load 56.6
(124.8 lbs).
When installing the display vertically, be sure that
the power indicator comes to the right side.
Power indicator
•
If installed in different directions, heat is generated
and it may cause fire or damage to the Display.
Cautions for Wall or Pedestal Installation
•
The installation should be performed by an installation
professional. Installing the Display incorrectly may
lead to an accident that results in death or serious
injury. Use the optional Pedestal that conforms to
VESA standards must be used.
•
When installing on a wall, a wall hanging bracket that
conforms to VESA standards must be used.
75-inch model
: VESA 600 × 400
65-inch model
: VESA 400 × 400
(see page 9)
•
Before installation, be sure to check if the mounting
location has enough strength to support the weight of
the display and the wall hanging bracket for anti drop.
•
If you terminate the use of the product, ask a
professional to remove it promptly.
•
When mounting the Display on the wall, prevent the
mounting screws and power cable from contacting
metal objects inside the wall. An electric shock may
occur if they contact metal objects inside the wall.
■
When using the LCD Display
The Display is designed to operate on 110 ‒ 240 V
AC, 50/60 Hz.
If problems or malfunction occur, stop using
immediately.
If problems occur, unplug the power supply plug.
•
Smoke or an abnormal odour come out from the unit.
•
No picture appears or no sound is heard,
occasionally.
•
Liquid such as water or foreign objects got inside the
unit.
•
The unit has deformed or broken parts.
If you continue to use the unit in this condition, it
could result in fire or electric shock.
•
Unplug the power supply plug from the wall outlet,
and then contact the dealer for repairs.
•
To cut off the power supply to this Display completely,
you need to unplug the power supply plug from the
wall outlet.
•
Repairing the unit yourself is dangerous, and shall
never be done.
•
To enable to unplug the power supply plug
immediately, use the wall outlet which you can reach
easily.
Do not touch the unit directly by hand when it is
damaged.
•
Electric shock could occur.
Do not stick any foreign objects into the Display.
•
Do not insert any metal or flammable objects into the
ventilations holes or drop them onto the Display, as
doing so can cause fire or electric shock.
Do not remove the cover (cabinet) or modify it.
•
High voltages which can cause fire or electric shocks
are present inside the Display. For any inspection,
adjustment and repair work, please contact your local
Panasonic dealer.
Ensure that the mains plug is easily accessible.
The mains plug shall be connected to a mains
socket outlet with a protective earthing connection.
