![background image](http://html2.mh-extra.com/html/panasonic/sp28p/sp28p_operating-instructions-manual_3937720077.webp)
Page 2-13
BASIC OPERA
TION
2
2-4-2
How to Change Password
∗
To change (set) the password, you need the key floppy disk for changing password.
1
. Insert the key floppy disk for chang-
ing password into the floppy disk
drive.
2
. Press
Engineer
on the main menu in the
operator mode.
3
. Press Password change .
4
. Enter a new password, then press
Decision .
5
. Enter the new password again, then
press Decision .
• When the password entered at the step 4 is the
same as the one entered at the step 5, it is
changed and the main menu of operator mode
is displayed.
6
. Press
Engineer
, and make sure you can
enter engineer mode with the new
password.
• If you cannot enter engineer mode, perform
this procedure from step 3 again.
7
. Take out the key floppy disk from the
floppy disk drive.
Engineer Mode
1E4C-E-OMA02-A01-01
2
1
3
Summary of Contents for SP28P
Page 2: ......
Page 6: ...4 1E4C E OMA00 B01 00 MEMO...
Page 14: ...12 1E4C E OMA00 A02 01 MEMO...
Page 64: ...Page 1 12 MEMO 1E4C E OMA01 A02 01...