![background image](http://html2.mh-extra.com/html/panasonic/sp28p/sp28p_operating-instructions-manual_3937720134.webp)
Page 5-12
To the next page
1E4C-E-OMA05-A01-02
1D3C-044P
1D3C-046P
1D3C-047P
1D3C-045P
5-3-1
Assembling Squeegees
1
. Loosen the M4 bolts of the squeegee
holder, and attach the squeegee.
∗
Positioning will be easy when you press the
squeegee, plate, and pressing plate against
edge with the squeegee holder turned upside
down.
2
. By bringing the squeegee into contact
with something flat like a surface
plate or support blocks, ensure that
no clearance between them.
3
. While slightly pressing down the
spring of the block with your finger,
insert the pin on the end into the
groove of the bracket.
•
Block (for 60º)
: This is used for the attack angle of 60º.
(Standard)
•
Block (for 55º)
: This is used for the attack angle of 55º.
∗
Both F and R must have the same attack
angle.
∗
Attack angle adjustment procedure.
∗
In the attack angle of 60º, enough solder may
not be filled in large apertures owing to its
properties. In this case, the attack angle of 55º
is recommended.
5-3
Procedures for Using Advanced Squeegees (Option)
Summary of Contents for SP28P
Page 2: ......
Page 6: ...4 1E4C E OMA00 B01 00 MEMO...
Page 14: ...12 1E4C E OMA00 A02 01 MEMO...
Page 64: ...Page 1 12 MEMO 1E4C E OMA01 A02 01...