Panasonic SP28P, Operating Instructions Manual

Page: 43 / 162

4
Page 29
(0.15 MPa to 0.20 MPa)
30 mm
±
5 mm
1B4C-028E
CLEANING SOLVENT FOR WET CLEANING
Ethyl alcohol 96%
IPA (Isopropyl alcohol) 4%
Considering cleaning results, costs, availability, etc., IPA is recommended.
(However, handle IPA with great care because it is flammable.)
Even if the IPA concentration is diluted to 4% by ethyl alcohol, the successful cleaning result can
still be obtained.
Solvent of 100% ethyl alcohol can be used, though the cleaning result deteriorates a little.
Never use acetone.
The use of acetone may damage the solvent tube and the cleaning unit, resulting in cleaning
solvent leakage.
Never use methanol (methyl alcohol).
The use of methanol breaks the solvent pump and disables its function.
Cleaning solvent may catch fire.
Handle with great care.
Use unused cleaning solvent.
Do not use water or the mixture of water and other cleaning solvent, as the
cleaning solvent.
Rust or change in quality of cleaning solvent may block piping and damage the machine.
When using cleaning solvent other than ethyl alcohol and IPA, consult us.
If the use of another cleaning solvent causes a problem, we will not repair under warranty.
Wear the mask to avoid an organic odor during work.
IPA contains the substance harmful to the human body.
Optimum discharge amount of cleaning solvent for cleaning
It is optimum to discharge 30 mm
±
5 mm width of cleaning solvent onto the cleaning paper for the
wet cleaning.
Adjustment method : Adjust the discharge amount with the regulator on the right inside of
the rear safety conveyor.
Increasing the pressure makes the discharge
amount larger.
Decreasing the pressure makes the discharge
amount smaller.
Recommended rate of mixed cleaning solvent :
1E4C-E-XXA00-A04-05