![background image](http://html2.mh-extra.com/html/panasonic/sp28p/sp28p_operating-instructions-manual_3937720099.webp)
Page 3-21
FUNCTIONS
3
Machine Adjustment
3-4-6
Mask Cleaning
This is used to check the process of mask cleaning motion.
∗
This will operate when the automatic solder cleaning function switch is enabled.
UNLOCK
+ One way cleaning
Cleans the back of the mask by moving the
mask cleaning unit back and forth once. The
taken time is displayed after operation.
UNLOCK
+ Round cleaning
Cleans the back of the mask by moving the
mask cleaning unit back and forth twice. The
taken time is displayed after operation.
UNLOCK
+ Cleaning 1 step
Cleans the back of mask step by step.
UNLOCK
+
Highlighted : Takes up the cleaning paper.
UNLOCK
+ Send out air of solvent
Bleeds the pipe to send cleaning solvent of air.
Use this function when the machine has been
stopped for a long time, because the solvent
has vaporized.
UNLOCK
+ Escape XY-table
Retracts the X-Y table.
Cleaning data
Cleaning data can be modified.
Cleaning time:
The time taken for the cleaning operation is
displayed.
(0.1 second unit)
3-4-7
Mask Recognition
This is used to recognize the mask and correct the mask recognition points.
•
UNLOCK
+ Mask recog
Executes mask recognition using the
production data.
• After mask recognition, the correction values
of mask recognition points are displayed.
“Mask” is displayed in ( ) to show that these
correction values are for the mask.
Paper feed
1E4C-E-OMA03-A02-02
Summary of Contents for SP28P
Page 2: ......
Page 6: ...4 1E4C E OMA00 B01 00 MEMO...
Page 14: ...12 1E4C E OMA00 A02 01 MEMO...
Page 64: ...Page 1 12 MEMO 1E4C E OMA01 A02 01...