manualshive.com logo in svg

Panasonic Section 700, Technical Manual

Share
Download
Panasonic Section 700 Technical Manual Download Page 97

Section 700 - Operation

Chapter 4. User Maintenance

ICX-35-700

ICX (International), March/1999

 97

5.   Press the HOLD key.

  1-

  

Mode Special Day 

displays

6.   Press the HOLD key.

  1000

:MMDD

  Special Day 01 

displays

7.   Enter the date by month (two characters) and day (two char-

acters) for the Special Day 1.

Note: To clear an entry or existing data, press the 

FL/R

 

key.

  

8.   Press the HOLD key.

  1001

:HHMM

  

S Day 01-1 Start

 displays

9.   Enter the start time in hours (two characters) and minutes 

(two characters) for mode 1.

Note: To clear an entry or existing data, press the FL/R key.

  

10.   Press the HOLD key.

  1002

:

  

S Day 01-1 Mode 

displays

11.   Enter the desired mode for Special Day ( (0 - None, 1 - 

Day 1, 2 - Day 2, 3 - Night, 4 - Night(1), 5 - Night (2)).

Note: To clear an entry or existing data, press the 

FL/R

 

key.

  

12.   Press the HOLD key.

  Next Special Day mode displays

13.   To set additional Special Day modes, press the volume up 

or down key or press the HOLD key to move to the desired 
mode.

  

14.   Repeat steps 7-13 until all Special Day modes are set. (Up 

to 20 special days may be entered.)

Note: The entry positions are listed in Table 13.

  

15.   Press the MEMORY key to exit the entry mode. 

  1-

  

Mode Special Day

 displays

16.   To return to the top menu level (81), press the PROG key. 

OR...

To exit the User Maintenance mode, press the ON/OFF 
key. 

  81-

  

User MAINT 

displays

  OR...

  ON/OFF LED goes off

Action

Result

Summary of Contents for Section 700
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands