Section 700 - Operation
Chapter 4. User Maintenance
ICX-35-700
ICX (International), March/1999
111
Operation
To set Walking TRS (Call Barring) Codes using either a large-display or small-display
phone:
Hardware Requirements
•
N/A
Considerations
•
N/A
Action
Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the 81 level, enter 08.
3. Press the HOLD key.
8108-
Walking TRS Cod
displays
4. Press the HOLD key.
Walking ID-Ext
displays
5. Dial the extension number.
6. Press the HOLD key.
Walking ID XXX
displays
7. Enter the 4-digit Walking TRS (Call Barring) Code.
8. Press the HOLD key to store the entry.
Next extension number displays
9. To set additional extension Walking TRS (Call Barring)
Codes, press the volume up and down key or press the
HOLD key to move to the desired Extension.
10. Repeat steps 8-10 until all extension are entered.
11. Press the MEMORY key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF LED goes off
