manualshive.com logo in svg

Panasonic Section 700, Technical Manual

Share
Download
Panasonic Section 700 Technical Manual Download Page 220

220

ICX (International), issued March/1999

ICX-35-700

Chapter 6. DSLT Features

Section 700 - Operation

Operation

To set Call Forwarding - No Answer:

To cancel Call Forwarding - No Answer:

Call Forwarding and Do-Not-Disturb

The System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for your 
own extension in one step.

Action

Result

1.   Lift the handset or press the ON/OFF key.

Intercom dial tone

2.   Enter the appropriate Set Call Forwarding code:

•   For your extension, enter 723 (UK/HK) or 723# (Taiwan, 

Malaysia, Indonesia).

•   For another extension, enter 743 (UK/HK) or 743# (Tai-

wan, Malaysia, Indonesia).

3.   If setting Call Forwarding for another extension, dial the 

number of the extension whose calls you wish to forward

4.   Dial the destination number:

•   If forwarding to another extension, dial the extension 

number.

•   If forwarding to an outside number, press the # key then 

enter the SSD bin number.

Note: Any outside number used for Call Forwarding must 
already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 243.) 

5.   Replace the handset or press the ON/OFF key.

Action

Result

1.   Lift the handset or press the ON/OFF key.

Intercom dial tone

2.   Enter the appropriate Cancel Call Forwarding code:

•   For your extension, enter 733 (UK/HK) or 733# (Taiwan, 

Malaysia, Indonesia).

•   For another extension, enter 753 (UK/HK) or 753# (Tai-

wan, Malaysia, Indonesia).

3.   If cancelling Call Forwarding for another extension, dial the 

extension number.

4.   Replace the handset or press the ON/OFF key.

Summary of Contents for Section 700
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands