Section 700 - Operation
Chapter 4. User Maintenance
ICX-35-700
ICX (International), March/1999
107
Set System Speed Dial Numbers
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 185 for a Digital
Key Telephone, “System Speed Dial” on page 245 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 289 for a Single Line Telephone (SLT).
Operation
To set SSD numbers:
Hardware Requirements
•
N/A
Considerations
•
N/A
Action
Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the 81 level, enter 02.
3. Press the HOLD key.
8102-
SSD Assignment
displays
4. Press the HOLD key.
0
:
SSD Number
displays
5. Press the HOLD key.
Enter SSD #
displays
6. Enter the SSD bin number (00-79 or 000-799).
7. Press the HOLD key.
-SSDXXX
XXX
displays (where
XXX = SSD bin number)
8. Enter the SSD digits to be dialled.
Note: Press the FL/R key to clear an entry or any existing
data.
9. Press the HOLD key to store the entry.
Next SSD bin number displays
10. To set additional SSD numbers, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
Desired SSD bin number displays
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT
displays
OR...
ON/OFF LED goes off