16
VQT0T60
3
Securely close the card slot cover.
∫
About the SD Memory Cards that you can use
¢
The recording may suddenly stop during motion picture recording. (P36)
∫
About the SD card
≥
Do not touch the terminals on the back of the SD card.
≥
Electrical noise, static electricity, or failure of this unit or the SD card may damage or
erase the data stored on the SD card. We recommend saving important data on a
PC by using the USB cable (supplied) or MotionSD STUDIO. (P74) (When saving
images recorded using this unit to a PC, you must use MotionSD STUDIO. )
≥
When using an SD card on which data has been written many times, the remaining
time left for recording may be reduced. (P36)
∫
About the card access lamp
≥
When this unit accesses the SD card (reading, recording, playback, erasing, etc.),
the access lamp lights up.
≥
If the following operations are performed when the access lamp is lit, then the SD
card or the recorded data may be damaged or this unit may malfunction.
– Opening the card slot cover and inserting or removing the SD card.
– Operating the [ON/OFF] switch or the mode dial.
∫
About the write protection switch on the SD Memory Card
≥
The SD Memory Card has a write protection switch
1
on it. If the
switch is moved to [LOCK], you cannot write to the SD card,
delete the data on it or format it. If it is moved back, you can.
Inserting/Removing an SD card (continued)
Recording mode
SD card capacity
8 MB, 16 MB
32 MB, 64 MB,
128 MB
256 MB, 512 MB, 1 GB,
2 GB
(Maximum)
Motion picture
recording mode
Cannot be
used.
Cannot be
guaranteed in
operation
¢
Refer to page 35.
Still picture
recording mode
Can be used.
2
1
VQT0T60_EB.book 16 ページ ２００５年８月２４日 水曜日 午後１時５７分
