Panasonic SDR-S100 Page 96 Operating Instructions Manual Download

Page: 96 / 112

VQT0T60

Indications (continued)

CHANGE TO MANUAL
MODE.

You have set the [AUTO/MANUAL/FOCUS] switch to
[AUTO] and are attempting to set [SCENE MODE] from
the menu screen.

CANCEL NIGHT VIEW
MODE.

You are attempting to set [SCENE MODE] from the menu
screen while COLOUR NIGHT VIEW is set. (P43)

TURN OFF POWER LCD.

You are attempting to set [LCD AI] from the menu screen
when the [POWER LCD] button has been pressed to
brighten the LCD monitor.

NO INK IN PRINTER.

Check the connected printer.

NO PAPER IN PRINTER.

PRINTER ERROR.

PLEASE CONNECT AC
ADAPTOR AND BATTERY.

The AC adaptor has not been connected or the battery
has not been inserted while the unit is connected to the
PC in PC Connection mode.

CHANGE MODE TO USE
USB.

The USB cable is connected in the motion picture
playback mode.

DISCONNECT USB CABLE.

Another mode has been selected from the PC Connection
mode while the USB cable was still connected.

Disconnect the USB cable and ensure that the battery has
been inserted in the unit. Then connect the AC adaptor
and the USB cable.

This indication appears if the USB cable remains
connected for more than 5 minutes when a printer or the
PC is connected.

The unit’s power cannot be turned off which the unit is
connected to the PC.

VQT0T60_EB.book 96 ページ２００５年８月２４日　水曜日　午後１時５７分

Summary of Contents for SDR-S100

















































































































Search results

Summary of Contents for SDR-S100

Reviews:

Related manuals for SDR-S100

Brands by name

Popular brands

Panasonic SDR-S100, Operating Instructions Manual

Search results

Summary of Contents for SDR-S100

Reviews:

Related manuals for SDR-S100

Brands by name

Popular brands