Panasonic SDR-S100 Page 75 Operating Instructions Manual Download

Page: 75 / 112

VQT0T60

≥

Even if the system requirements mentioned in these operating instructions are
fulfilled, some personal computers cannot be used.

≥

This software is not Macintosh compatible.

≥

This software is not compatible with Microsoft Windows 3.1, Windows 95,
Windows 98, Windows Me and Windows NT.

≥

Operation is not guaranteed on an upgraded OS.

≥

Operation on an OS other than the one pre-installed is not guaranteed.

≥

When 2 or more USB devices are connected to a PC, or when devices are
connected through USB hubs or by using extension cables, proper operation is not
guaranteed.

≥

Use the supplied USB cable when connecting to the PC. (Operation is not
guaranteed with any other USB cables.)

– IBM and PC/AT are registered trademarks of International Business Machines

Corporation of the U.S.

– Intel

, Pentium

and Celeron

are registered trademarks or trademarks of Intel

Corporation in the United States and other countries.

≥

To upgrade the Windows Service Pack

(

SP1, SP4 etc.), select [start] (

[All

Programs (Programs)])

[Windows Update]. (Internet connection is required for

this.)

VQT0T60_EB.book 75 ページ２００５年８月２４日　水曜日　午後１時５７分

Summary of Contents for SDR-S100

















































































































Search results

Summary of Contents for SDR-S100

Reviews:

Related manuals for SDR-S100

Brands by name

Popular brands

Panasonic SDR-S100, Operating Instructions Manual

Search results

Summary of Contents for SDR-S100

Reviews:

Related manuals for SDR-S100

Brands by name

Popular brands