100
VQT0T60
Trouble shooting (continued)
Problem
Check points
Recording does not
start although power is
supplied to this unit and
the SD card is correctly
inserted.
≥
Has the SD card’s write protect switch been set to
[LOCK]?
>
No recording is possible while the write protect switch is
set to [LOCK]. (P16)
≥
Is the SD card’s memory full?
>
If the card has no more available memory, free up some
memory by copying some scenes to a PC (P81) and then
deleting unnecessary scenes (P63).
≥
Is the unit set to the motion picture recording mode or
still picture recording mode?
>
No recording is possible unless the mode dial is at
or .
(P21)
≥
Is the card cover open?
>
If the cover is open, this unit may not operate normally.
Close the card cover. (P15)
Motion picture
recording stops
suddenly.
≥
Can the SD card be used for motion picture recording?
>
Use an SD card that can be used for motion picture
recording. (P35, 36)
Auto focus function
does not work.
≥
Is manual focus mode selected?
>
If auto mode is selected, focus is automatically adjusted.
(P33)
≥
Are you trying to record a scene which is hard to bring
into focus in auto focus mode?
>
There are some recording subjects and surroundings for
which the auto focus does not operate correctly. (P105) If
so, use the manual focus mode to adjust the focus. (P46)
≥
Is the colour night view set?
>
When the colour night view is working, focusing shifts
into the manual mode. (P43)
A sentence is displayed
in the screen centre.
≥
Read the contents and respond to them. (P95)
A function indication
such as mode
indication, remaining
time indication, or time
code indication is not
shown.
≥
If you set [SETUP]
>
[DISPLAY]
>
[OFF], indications
other than warnings and date indications disappear.
Sound is not played
back from the built-in
speaker of this unit.
≥
Is the volume too low?
>
During playback, move the volume lever to display the
volume indication and adjust it. (P59)
VQT0T60_EB.book 100 ページ ２００５年８月２４日 水曜日 午後１時５７分