12
VQT0T60
26 LCD monitor (P22, 108)
27 Power LCD button [POWER LCD] (P31)
28 Reset button [RESET] (P102)
29 Card access lamp [ACCESS] (P16)
30 Card slot open lever (P15)
31 Card slot cover (P15)
32 Strap fixture (P13)
Lens hood
1
In order to remove the lens
hood, rotate it
counter-clockwise.
2
In order to fit it, put into slot
A
,
and then rotate it clockwise .
≥
When fitting the tele conversion
lens (VW-LT3714ME; optional) or
the wide conversion lens (VW-LW3707M3E; optional), first remove the lens hood.
≥
When attaching the tele conversion lens (VW-LT3714ME; optional) or wide
conversion lens (VW-LW3707M3E; optional), place this unit in a way so that it is
stable such as lying down on its side.
Tripod mount
This is a hole for attaching this unit to a tripod
(optional). (Please carefully read the operating
instructions for how to attach the tripod to the unit.)
This unit does not have a hole for a tripod pin so
attach it to a tripod without a tripod pin. If you try to
forcibly attach this unit to a tripod with a fixed tripod
pin, this unit may get scratched or damaged.
≥
When a tripod is used, you can perform
operations easily using the remote control.
≥
When the tripod is used, the card slot cover and
battery cover cannot be opened. Insert an SD card or the battery before attaching
this unit to the tripod. (P15, 17)
1
Camera base
Parts identification and handling (continued)
26
27
30
31
32
29
28
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
VQT0T60_EB.book 12 ページ ２００５年８月２４日 水曜日 午後１時５７分